Your POS prints on the iMin Swan 2's own 80mm printer: order dockets, X and Z reports, tax invoices and test prints. It opens a cash drawer plugged into the Swan too. It works in the mypreorder POS app on the Swan, and in Chrome on the Swan. While the POS is open it also prints your online orders as they come due, within about 30 seconds. Admins only.
Available in POS version 4.6.0 and later. To see which version you have, select Manager, enter a manager's PIN and select Diagnostics. It's the App version under Build.
Before you start
- An iMin Swan 2 with its built-in printer, and 80mm paper in it.
- The POS signed in on that Swan, in the POS app or in Chrome, with a POS device login that's used only on that Swan. See Add a POS or Kiosk device.
- In Chrome: an up-to-date Chrome.
1. Add the printer in the merchant portal
- Go to Settings → Printers, select Add printer, then iMin built-in.
- Printer section:
- Name* —
1. Every menu item's Printer(s) starts as1, so a printer named1prints every order. With any other name, it prints only the items whose Printer(s) list that name. See Choose which items print where in Set up a Star CloudPRNT docket or label printer: names work the same for every make. The name can't start withKIOSK: the printer prints for its own POS, not a kiosk. - Orders from — Counter, Kiosk and Online: the orders that print a docket here, all ticked to start. Untick any it shouldn't print.
- Paper width — 80mm.
- Name* —
- How it prints section: Printed by is always The POS device it's built into. Under POS device, tick the Swan's POS device. Only one can be ticked.
- Cash drawer section, if a drawer is plugged into the Swan: tick A cash drawer is plugged into this printer, and set Opens for to that same POS device. Opens for only appears when your store has more than one POS device.
- Status — Active. Select Save changes.
There's no Connection section: the Swan reaches its own printer. In the printer list, the printer shows IMIN, built-in printer, the POS device that prints it, and Active.
2. Reload the POS and test it
- On the Swan, reload the POS page in Chrome, or close the POS app and open it again, so it picks up the printer.
- Select Manager, enter a manager's PIN, and find Printers.
- Select Check: "Reached it. Ready to print." In Chrome, the first time, Chrome asks a question first: see The first time in Chrome below.
- Select Test print. A short slip saying Test print comes out.
- Ring up a small cash sale: the docket prints, and the drawer opens, straight away.
The first time in Chrome
The first time the POS reaches the printer, Chrome asks "pos.mypreorder.com wants to access other apps and services on this device", with Allow and Block. Select Allow. Chrome remembers it, so it asks only once. The POS app never asks.
- If a print came before the answer, nothing printed, and the POS says "Nothing was printed: Chrome is asking to let this POS reach other apps and services on this device. Tap Allow, then print again." Tap Allow, then print again. Check says "Chrome is asking to let this POS reach other apps and services on this device. Tap Allow, then check again."
- If someone tapped Block, the POS says "Nothing was printed: Chrome is blocking this POS from reaching its printer. Tap the icon to the left of the address, allow access to apps and services on this device, then print again." Do just that: tap the icon to the left of the address, allow access to apps and services on this device, then print again.
Do Check and Test print before you trade, so the question comes up before a customer's docket.
Cash drawer
Plug the drawer's cable into the RJ12 port on the Swan's main unit. The printer itself has no drawer port. Then tick Cash drawer on the printer in Settings → Printers (step 1).
- It opens for cash sales and cash refunds on the POS, No sale, Paid in, Paid out and closing the till. It never opens for card sales.
- No sale, Paid in, Paid out, a cash refund and closing the till open the drawer even when the printer's cover is open or it's out of paper: the drawer is wired to the Swan, not the printer.
- A cash sale opens the drawer as its docket prints. If the docket didn't print (cover open, out of paper), the drawer stays shut: fix the printer and select Print again within 90 seconds of the sale, and the drawer opens as it prints. After that, use the key.
The POS's X and Z reports and tax invoices print on this printer too. See Connect a cash drawer to the POS.
Two copies of a docket
A docket prints as many copies as the highest Copies among its items. Set Copies on each item in Menu Builder, under Show advanced settings → Printing. If you can't see it, contact us and we'll switch it on for your store. See Add a product to your menu.
Orders for later
An order for later prints by itself when it's due. When you take one on the POS, it asks Print the docket now? Choose Print the docket now to print it straight away (it won't print again when it's due), or the time shown to let it print when it's due.
When a docket doesn't print
The Printer status button at the top of the POS, beside Help, shows how many didn't print, and why. What the POS says, and what to do:
| The POS says | What to do |
|---|---|
| "The printer cover is open." | Close the cover, then select Print again. |
| "The printer is out of paper." | Load a new roll, then select Print again. |
| "The printer is too hot. Give it a minute, then print again." | Wait a minute, then select Print again. |
| "This POS’s built-in printer isn’t answering. Nothing was printed: check it’s the iMin the printer is in, then print again." | Check this is the Swan whose POS device is ticked on the printer. On any other device, it means the Swan's POS login is signed in there: see One Swan, one printer below. If it is the right Swan, restart it, then select Print again. |
| "… Check what printed before printing again: the rest may print by itself once it’s fixed, missing a line where it stopped." | The paper ran out, or the cover was opened, partway through a docket. See Check what printed below. |
| "The printer isn’t ready. Restart this POS, then print again." (or "The printer has a fault.", "The printer isn’t switched on.") | Restart the Swan, then select Print again. |
| "The printer didn’t answer in time. Check whether it printed before printing again." | Check whether it printed before you print it again. |
Check what printed. If the paper runs out or the cover is opened partway through a docket, the printer stops there. Once you load paper or close the cover, it can finish the docket by itself, on a new piece of paper, missing the line where it stopped. The POS has already said it didn't print, so look at what came out before you select Print again, or the kitchen gets the order twice.
A docket the printer turned away before it started (cover open, out of paper) never prints later by itself, so Print again prints it once. For more on Print again, Open the drawer and Not confirmed, see Print straight from the POS to your printer.
Use Check in Manager → Printers to see what the printer reports right now.
Nothing prints while the POS is closed
The POS on the Swan prints, and there's no CloudPRNT to fall back on. While the POS app is closed (or, in Chrome, the POS tab), or the POS is signed out, nothing prints. Online orders that arrive meanwhile print when it's opened again, up to 30 minutes after their pickup or delivery time; later than that they aren't printed. To print online orders with no POS open, use a Star printer: see Set up a Star CloudPRNT docket or label printer.
One Swan, one printer
- The printer prints for the one POS device it's built into. The portal won't tick a second POS device on it: "An iMin’s built-in printer prints for the one POS device it’s built into: tick just that one."
- A POS device has one built-in printer. The portal won't give a POS device a second iMin printer. It says, for example, "Front counter already prints to its own built-in printer, 1. Untick it there, or make 1 inactive, first."
- Keep the Swan's POS login for the Swan alone. Signing it in on another tablet, PC or phone signs the Swan out, and the Swan stops printing. Chrome and the POS app on the same Swan count as two devices too, so use one of them. Give every other device its own login: see Add a POS or Kiosk device.